DEFY Solid Color Wood Stain

Technical Info Defy Solid Stain

SURFACE PREPARATION

Allow new wood to weather for 3 to 6 months to adequately dry out prior to application. Kiln dried lumber can be stained immediately.

CLEAN: All wood surfaces must be clean, porous, and visibly dry before applying DEFY Solid Color Wood Stain. For best results, use DEFY Wood Cleaner to remove dirt, mill glaze, mold or mildew stains, graying and other foreign matter that might block surface pores and interfere with product penetration. Rinse thoroughly using a garden hose or pressure washer.

BRIGHTEN: While surface is still wet from cleaning or stripping, use DEFY Wood Brightener to neutralize the wood, restore the wood to its natural color, and open the pores of the wood, allowing the stain to be more easily absorbed.

APPLICATION

WEATHER CONDITIONS: Surface and air temperatures should be between 45°F and 95°F. Avoid application in direct sunlight. Do not apply to wet or water saturated surfaces, or when rain is expected within 12 hours. Stain may be applied to wood surfaces the same day as cleaning and brightening as long as surface is visibly dry before staining.

MIX WELL: Shake or stir contents before and periodically during use. To ensure absolute color uniformity from container to container, mix at least one third of the product from a used container with the contents of a new one. Do not thin product.

PROTECT ADJACENT AREAS: Use plastic, cardboard, and/or drop cloths to protect all adjacent non-targeted surfaces such as siding, windows, masonry, plant life, etc. from overspray and runoff. Immediately remove overspray from non-targeted areas with soap and water. Overspray that is allowed to dry will be difficult to remove.

USE THE RIGHT EQUIPMENT: Hand brushes should be high quality nylon or polyester. A paint roller may also be used. If using an airless sprayer, use tips between .013 and .015, and use the lowest pressure that achieves a uniform spray pattern to minimize fogging and overspray when spraying. To insure a uniform finish, it is always best to back brush when spraying.

APPLY: Most applications require 2 coats of product be applied, waiting for the first coat to dry before applying the second.

DRY TIME: To touch, one to two hours depending on temperature and humidity. Allow 24 hours for deck to completely cure before using. High humidity and lower temperatures can greatly increase dry time.

CLEAN-UP: Clean tools and equipment immediately after each use with soap and water.

COVERAGE: One gallon will cover approximately 200-300 sq. ft. per coat, depending on wood texture and porosity.

PRECAUTIONS

Keep out of reach of children. Avoid contact with eyes, skin, and clothing. Wash hands and exposed skin after use.

FIRST AID

IF INHALED: Remove to fresh air. Get medical attention if symptoms persist. SKIN CONTACT: Wash  with soap and water. Get medical attention if irritation develops and persists. EYE CONTACT:Flush with water for several minutes. Get medical attention if irritation persists. IF SWALLOWED: DO NOT induce vomiting. Rinse mouth with water. Get medical attention if symptoms develop. For additional information for this product, consult the Product Data Sheet.