Now Available in the Original Low-Gloss and the NEW High-Gloss.
Masonry Saver (Defy) Epoxy Fortified Paver Sealer is formulated with special, heavy-duty resins and mildewcides, that help to reduce the occurrence of fungus while also encapsulating the joint sand to retard the infiltration of ant colonies. It is also a paver sand sealer that helps keep patios cleaner by stabilizing the joint sand, bonding it firmly in place, and helping to keep the sand from washing out during periods of heavy rain as well as helping to reduce weeds from growing up through the joint sand. When properly applied, Masonry Saver Epoxy Fortified Paver Sealer enhances the beauty of any paver with a rich “wet” look without causing the surface to become slippery.
- Protection From Water & Ultra-Violet Light Damage
- Protection From De-Icing Salts & Chemicals
- Freeze/Thaw Protection
- Stabilizes Joint Sand to Reduce Rain Wash-Out
- Minimizes Weed Growth and Ant Colonization
- Mildew/Fungus Protection
- Provides a Rich “Wet Look” to Stone & Concrete
Coverage Rate:(2 Coats)
Cement Pavers: 75-150 sq. feet per gallon
Clay Pavers: 150-200 feet per gallon. Actual rates will vary widely due to substrate porosity.
Does your high gloss version of the masonry paver sealer make the surface of the stone slippery?
Varies based on the surface porosity and how many coats but typically, no.
Great Paver Sealer!
How do you apply masonry saver paver sealer?
https://www.deckstain.com/pdf/paversealer.pdf
My clay brick walkway with polymeric joints also has some vertical surfaces on step risers and side walls. Can this product be used on vertical too?