ChimneyRx Paint n Peel Fireplace Cleaner

ChimneyRx Paint n Peel Fireplace Cleaner 1/2 Gallon

Have a smoke and soot stained fireplace? ChimneyRx Paint “N” Peel Fireplace Cleaner is your answer. Over time small black carbon-based particles embed into your masonry surface around your fireplace. These stains are very difficult to  remove and usually require the use of harsh chemicals in your home with a lot of time and mess until now… With ChimneyRx  Paint “N” Peel Fireplace Cleaner your fireplace can look new again. The cleaner is specially formulated to remove smoke and soot stains. It’s as easy as 1,2,3. Paint on,Let it Dry, Peel it off.

Chimney RX Paint “N” Peel Fireplace Cleaner is a water- based cleaning poultice that removes unsightly smoke, soot, creosote and dirt stains from masonry fireplace fronts and hearths. No additional water is needed for application or removal. Simply paint the product on the surface, allow it to dry, and then peel it off.

Chimney Rx Paint “N” Peel Fireplace Cleaner Advantages

• Restore the Appearance of Your Fireplace
• Environmentally Friendly
• No Noxious Odors
• Interior/Exterior Use

Coverage:
When applied at 1/8”-3/16” thickness, product will cover 20 – 40 sq. ft. per half gallon depending on the texture and density of the surface.

DIRECTIONS FOR USE
Do not thin product. Apply when surface and air temperatures are between 45°F and 95°F.

Preparation:
Wipe surface with a dry or slighty damp rag to remove dust. Mask off work areas and cover all non-target surfaces with plastic or dropcloths. The use of removable painters tape is recommended to protect surfaces adjacent to product application, such as fireplace glass doors, fireplace mantles and any trim that abuts the masonry to which product is to be applied. Be sure to protect all surrounding carpet, fabric, metal, wood, and painted surfaces from inadvertent spills and roller splatter, as product may cause stains or damage to non-target surfaces. For best results, surfaces to which product is to be applied should be dust free, dry, and cool to touch before application. Do not apply while fireplace is in use.

APPLICATION
Stir before use. Apply a thick, liberal coat, approximately 1/8” – 3/16” thickness using a paint brush and/or a thick nap roller. Be sure to maintain the recommended thickness across the entire surface area to be coated and near the edges of your project. Ensuring an even application will help the product peel off easily and uniformly when dry. For areas that are more heavily soiled, agitation with a stiff nylon bristle scrub brush may be required to help the product work deeper into the surface. Once surface has been agitated, recoat to be sure a thick, even application of product remains on surface. On extremely porous surfaces or in extremely dry conditions, it may be beneficial to lightly mist the surface with water, agitate with a soft bristle brush and blot dry with clean rags just prior to application to help prevent product from drying out too quickly